Casio ALGEBRA FX 2.0, Руководство пользователя

Страница: 384 / 426

19990401
•
1
(YES) ... {replaces the receiving unit’s existing data with the new data}
•
6
(NO) ... {skips to next data item}
*
2
With password check: If a file is password protected, a message appears asking for input
of the password.
Name of password protected file
Password input field
2
After inputting the password, press
w
.
Note the following precautions whenever you perform data communications.
• An error occurs whenever you try to send data to a receiving unit that is not yet standing
by to receive data. When this happens, press
i
to clear the error and try again, after
setting up the receiving unit to receive data.
• An error occurs whenever the receiving unit does not receive any data approximately six
minutes after it is set up to receive data. When this happens, press
i
to clear the error.
• An error occurs during data communications if the cable becomes disconnected, if the
parameters of the two units do not match, or if any other communications problem
occurs. When this happens, press
i
to clear the error and correct the problem before
trying data communications again. If data communications are interrupted by
i
key
operation or an error, any data successfully received up the interruption will be in the
memory of the receiving unit.
• An error occurs if the receiving unit memory becomes full during data communications.
When this happens, press
i
to clear the error and delete unneeded data from the
receiving unit to make room for the new data, and then try again.
10-5-2
Data Communications Precautions