Case XLR 550, Руководство пользователя, Страница: 56 / 96

Revision 1.3a Page 51
XLR 550 Manual
4.8 Port Management
This section describes a list of commands that configure and display information about 100BASE-T
and 2BASE-TL ports
4.8.1 set port
To configure information about 100BASE-T and 2BASE-TL ports.
Usage
set port <port names> linkmode { auto | full | half } [ { 10 | 100 } ]
set port <port names> flowcontrol { enable | disable }
set port <port names> description < description >
set port <port names> portvlan < members >
set port <port names> pvid < vid >
set port <port names> doubletag { enable | disable }
set port <port names> maxrate { < rate > | unlimit }
set port <port names> fixed-priority < priority >
set port <port names> classifier { fixed | dot1p | dscp }
Arguments
keyword Description
<port names>
Name of the port.
<port names> : e0
…
e3, s0, all
If you enter all keyword in this argument , set all port to the same
value that you supply.
linkmode
Applies only to 100BASE-T port.
Configure the link mode of port.
To configure the link mode : auto, full, half
To configure the link speed : 10, 100
If you enter
auto , you don
’
t need to supply { 10 | 100 }
flowcontrol
Applies only to 100BASE-T port.
Enable or Disable flow control back pressure on this port.
description
Description of the port.
<
description > : A case
‐
sensitive string of 1 - 64 characters
(not including tabs, spaces, double quotes(
“
))
portvlan
To configure port-based VLAN.
This configuration allows the port to send frames to the only
member ports.
The default configuration allows all ports to send frames to all
the other ports.