Revision 1.3a
Page 5
2.6.
LAN Port Part (10/100BASE-T)
The XLR 500 connects to a network device, such as an Ethernet switch, through their 10/100
Mbps Ethernet ports. The XLR 500 ports provide RJ-45 female connector’s so they can be
connected using a UTP cable with two RJ-45 jacks for the connection.
In addition, each Ethernet port has 2 LEDs so that user can be aware of the Ethernet ports
connectivity. One is for link status and RX status, the other for TX status.
Table 2-3 A below provides a summary of the ports LEDs and 2.3B of the pin outs.
The LAN port supports 10/100Mbps speed on the UTP cable at a distance of up to 100 meters
or less. Figure 2-3 lists the pin-outs for the LAN port connector (labeled "10/100BASE-T" ).