Case 621G Stage IV, Оригинальное руководство пользователя

Страница: 90 / 430

3 - CONTROLS AND INSTRUMENTS
Three function valve - three control levers
Bucket Control (1)
A. DUMP
B. ROLLBACK
A - B. AUTOMATED BUCKET METERING – used to im-
prove material metering out of the bucket at a consistent
rate. To engage automated functionality, move the joy-
stick rapidly back and forth from “A” Dump to “B” Rollback
position. The bucket accelerates more quickly while this
motion is maintained after 4 neutral point crossings. Reg-
ular bucket control resumes as soon as the back and forth
motion is stopped.
C. HOLD (central position) - The loader arms and bucket
will not move when the control lever is in the HOLD po-
sition. When released, the control lever will automatically
return to the HOLD position.
Lift Arm Control (2)
D. FLOAT – When in the FLOAT position, the loader
bucket floats across the rough ground.
E. LOWER
F. HOLD (central position) - The loader arms and bucket
will not move when the control lever is in the HOLD po-
sition. The control lever will automatically return to the
HOLD position when released.
G. RAISE
Auxiliary control (3)
H. AUXILIARY FUNCTION
I. AUXILIARY FUNCTION
LEIL16WHL1302AA
7
87536093
8
NOTE: since the decal is applied on the right-hand side
window, the directions are to be intended as follows:
A, D, E, H: Forward
B, G, I: Backward
3-30