Case 621G Stage IV, Оригинальное руководство пользователя

Страница: 176 / 430

4 - OPERATING INSTRUCTIONS
Bucket height control
Use the bucket height control to automatically stop the
loader arms at the height selected while traveling upward.
To enable the bucket height control press the button
(2) .
The green LED indicator lights up to indicate that the func-
tion is active.
To set the bucket height control proceed as follows:
1. Briefly press the corresponding button (2) on the mul-
tifunction keypad to activate the function; the green
LED indicator lights up to indicate that the function is
active.
2. Set the attachment or the bucket to the desired loca-
tion.
3. Press and hold the button (2) on the multifunction key-
pad until the green LED indicator light flashes (approx-
imately
2 s ).
4. The bucket height control function is now set. Display
will prompt that the detent position is saved.
LEIL16WHL1130AB
4
To actuate the bucket height control function, move the
joystick full back into the RAISE position until the func-
tion activation point is reached. When the function activa-
tion point is reached, the operator will notice more resis-
tance from the joystick. If released, the joystick will auto-
matically return to the HOLD (central) position and the lift
arms will continue to raise until the arms reach the desired
height. If you move the joystick when the bucket height
control function is activated, the loader arms will stop.
LEIL17WHL2055AB
5
4-26