3
P/N 016-5032-164 Rev. A
9
WHEEL ANGLE SENSOR INSTALLATION
FIGURE 5. Base End Installed in the WAS Bracket
6. Using the provided M10 lock nut, secure the base end of the WAS to WAS Mounting bracket.
7. With the wheels pointed straight ahead, adjust the U-bolt until half of the sensor stroke length is used.
8. Tighten the U-bolt hardware.
9. Connect the WAS Adapter Cable (P/N 115-4010-032) to the WAS.
FIGURE 6. WAS Adapter Cable Installed
10. Connect the other end of the WAS adapter cable to the AutoSense connection.