C
HAPTER
3
8
Case IH Titan 4XXX - Steering Ready, Model Years 13 and Newer Raven SC1 HDU Guidance and Steering Installation Manual
2. Using the supplied M10 lock nut (P/N 312-4000-208), attach the rod end of the sensor to the M10 - 1.5 x 35 mm
bolt in the WAS Mounting bracket.
FIGURE 3. Rod End of the WAS Secured to the WAS Bracket
3. Install the WAS Base End Mounting Bracket (P/N 107-0172-591) by inserting it between the hydraulic manifold
and front axle.
4. Use the provided M8 - 1.25 x 30 mm bolts (P/N 311-4050-181K) to secure the WAS bracket and the hydraulic
manifold.
FIGURE 4. WAS Installing Location
5. Feed the stud on the base end of the WAS into the closest hole in the WAS base end mounting bracket.