4
P/N 016-5032-164 Rev. A
13
CAB COMPONENT INSTALLATION
INSTALL THE SC1/HDU CABLES
INSTALL THE HDU HARNESS CABLE
1. Lift the top of the instructional seat.
FIGURE 4. POWER Connection
2. Locate the machine’s X-200 POWER GND PORT INTERFACE connection on the machine’s harness, stored under
the instructional seat.
3. Connect the POWER connector of the SC1 harness cable (P/N 115-4010-109) to the machine’s X-200 POWER
GND PORT INTERFACE.
FIGURE 5. 37-Pin Interface Connection
4. Connect the 37-pin connector of the SC1 harness cable to the machine’s X-717 RAVEN AG INTERFACE
connection, located on the floor of the instructional seat compartment.
5. Connect the black and gray 12-pin Deutsch connectors to the HDU.
