Cascade Sciences CVO-5-EX Series, Руководство по установке и эксплуатации

Страница: 58 / 132

58 | P a g e
cascadesciences.com | Tel. 503 847-9047
INSTALLATION
I
NSTALLATION
C
LEANING
The manufacturer recommends cleaning the shelving and oven chamber prior to installation of the
shelving in the chamber. The unit was cleaned at the factory but may have been exposed to
contaminants during shipping.
• Remove all wrappings and coverings from shelving before cleaning and installation.
•
Do not clean with deionized water.
DI water can be corrosive to metal surfaces.
• See the
11T11T11T
Cleaning
11T11T11T
topic in the User Maintenance section (page 117) for more information
on how to clean and disinfect without damaging the unit.
I
NSTALL THE
S
HELVING
Install the shelves evenly spaced in the oven chamber to maximize temperature uniformity. Please
see the orientation image on page 40 as a reference.
For each shelf:
1. Install the shelf clips in the slots of the shelf standard mounting rails located on the sides
of the chamber interior, 4 clips per shelf.
o Squeeze each clip, insert the top tab first, and then the bottom tab using a rocking
motion.
2. Set the shelf on the clips and verify the shelf is level.
End of Procedure
Shelf Clip Rocking Motion
Shelf seated on clips