Cascade Sciences CVO-2-HT, Инструкция по установке и эксплуатации

Страница: 53 / 72

53 | P a g e
cascadesciences.com | Tel. 503 847-9047
USER MAINTENANCE
Continued on next page
Calibration continued
3
Unlock the controller.
a. See the Unlocking procedure on page 55.
Note: The temperature controller must be unlocked in order to
access the Operations menu and enter a calibration offset.
4
Navigate to the Operations menu after unlocking the
controller.
a. Press and hold both the Up and Down Arrow buttons
simultaneously for approximately 5 seconds.
b. Release the buttons when “A1” appears on the top
display line and “oPEr” appears in the mid display line.
Operations Menu
5
Advance through the Operations menu options to the
Temperature Calibration offset parameter.
Push the green
Advance button repeatedly until “i.CA”
appears in the green mid display line and a number value in
the red top line.
6
Adjust the number value in the top display line to match the
offset value from step 2, using the arrow buttons.
7
Save the calibration offset and return to the homepage.
a. Push the Reset button 3 times so the display shows the
homepage.
•
The oven will begin to heat or passively cool to reach the
current set point using the offset display value for the current
temperature.
x2
x3