Cascade Sciences CVO-10, Руководство по установке и эксплуатации

Страница: 39 / 56

39 | P a g e
cascadesciences.com | Tel. 503 847-9047
OPERATION
Note:
There may be light smoking from protective oil coatings on the elements when running the
oven near its maximum temperature for the first time.
P
UT THE
O
VEN INTO
O
PERATION
Verify all required procedures in the Installation chapter have been completed before beginning.
The oven is now ready for use.
1.
Plug In the Power Cord
Attach the power cord that came with the unit to the power inlet
receptacle on the back of the oven.
Plug the power cord into the workspace electrical supply.
2.
Verify both valves are closed
Always verify the oven chamber is sealed prior to starting the oven.
•
This helps safeguard your vacuum pump from prolonged and
possibly damaging exposure to streaming atmosphere.
3.
Turn on the Oven and dismiss the outage Indicator
Place the oven Power Switch in the on ( I ) position.
Dismiss the Outage icon by pressing it once the homepage has
loaded.
4.
Verify the vacuum system Integrity
10 Mininute Minimum
Evacuate the oven chamber for a minimum of 10 minutes to verify the
integrity of the vacuum supply system. See page 40
•
Leave the chamber under vacuum to perform the next step.
5.
Set the operating temperature
Set the Oven Temperature to your baking application temperature.
See page 41.
Note: The oven chamber should always be under vacuum when
heating the chamber to the setpoint.
6.
Heat the Oven Chamber
See page 42.