Cascade Sciences CVO-10 Скачать руководство пользователя страница 22

Страница: 22 / 56

22 |

P a g e

cascadesciences.com

Tel. 503 847-9047

INSTALLATION

Accessory Outlet Fuses

: Each oven ships with one or more 5x20mm fuses installed fuse holders

next to the accessory outlet.

Model

Type

Quantity Max allowed outlet draw

CVO-5

T8A 250V

8 amps

CVO-5-2

T4A 250V

4 amps

CVO-10

T4A 250V

4 amps

•

These fuses

do not

protect against overcurrent conditions in the major systems of the oven.

The fuses only safeguard against events involving outlet power supply.

•

If one fuse blows, the outlet will cease to provide power. The cause of a blown fuse should

always be determined and fixed prior to using the outlet or oven.

ENERAL

OWER

AFETY

Your unit and its recommended accessories are designed and tested to meet strict safety
requirements. It is designed to connect to a power source using the specific power cord type
shipped with the unit.

For continued safe operation of your unit, always follow basic safety precautions including:

•

Always plug the unit power cord into a protective earth grounded electrical outlet that

conforms to national and local electrical codes. If the unit is not grounded properly, parts

such as knobs and controls can conduct electricity and cause serious injury.

•

Do not bend the power cord excessively, step on it, or place heavy objects on it.

•

A damaged cord can be a shock or fire hazard. Never use a power cord if it is damaged or

altered in any way.

IFTING AND

ANDLING

The oven is heavy. Use appropriate lifting devices that are sufficiently rated for these loads. Follow
these guidelines when lifting the oven:

•

Lift the oven only from its bottom surface.

•

Doors, handles, and knobs are not adequate for lifting or stabilization.

•

Restrain the oven completely while lifting or transporting so it cannot tip.

•

Remove all moving parts, such as shelves and trays, and lock doors in the closed position

during transfers to prevent shifting and damage.

Содержание CVO-10

























































Результаты поиска

Содержание CVO-10

Отзывы:

Похожие инструкции для CVO-10

Бренды по названию

Популярные бренды

Cascade Sciences CVO-10, Руководство по установке и эксплуатации

Результаты поиска

Содержание CVO-10

Отзывы:

Похожие инструкции для CVO-10

Бренды по названию

Популярные бренды