CAS LP 1.6 Series, Руководство пользователя

Страница: 23 / 34

45 44
How to program printing information
1) To go to PROGRAM mode, press 10000 by using numeric keys and VOID key.
2) Press key five times.
3) The WEIGHT display shows “SEt”.
4) Press PRT/* key, “SEt EntEr”.
5) Press 6 key and PRT/* key.
6) The display shows “PmodE EntEr 0”.
7) Look at the table below and type number that you want.
8) Press PRT/* key. The display shows “PEEL EntEr 1”.
9) Look at the table below and type number that you want.
10) Press PRT/* key. The display shows “SEt”.
11) If you wish to finish PROGRAM mode, press C key
pMode 0 : No change with unit price
pMode 1 : Temporary change with unit price
pMode 2 : Permanent change with unit price
<PEEL sensor ON/OFF>
0 : Peel sensor OFF
1 : Peel sensor ON
How to program auto print function
1) To go to PROGRAM mode, press 10000 by using numeric keys and VOID key.
2) Press key five times.
3) The WEIGHT display shows “SEt”.
4) Press PRT/* key, “SEt EntEr”.
5) Press 7 key and PRT/* key.
6) The display shows “AUtoP EntEr 100”.
7) The number in the Total Price display represents the weight sensitivity number by which
your scale calculates auto print. The default is “0.100”. Enter the weight sensitivity number
by using numeric keys.
8) Press PRT/* key. The display shows “SEt”.
9) If you wish to finish PROGRAM mode, press C key.
4.7.7 Programming the Auto Print Function (SET #7)
The auto print function is used to determine when an automatic buffered label should be
printed or buffered. The number stored in auto print is a weight value which is equal to the
amount of stabilized positive weight variance needed to print or buffer a label. For example, if
the auto print value is set to “0.100”, then the scale will automatically print a label when the
weight changes by 0.100g and stabilizes.