CAS LP 1.6 Series, Руководство пользователя

Страница: 30 / 34

59 58
6. Error Messages
Error 1 The PLU number you have called up does not exist.
Error 2 The PLU number you have called up is out of range.
Error 3 The weight on the platter is not stable or you have pressed the keys before the weight became stable.
Error 4 Tare weight was set.
Error 5 PLU data is corrupted or broken. Backup RAM, initialize the scale, re-enter the bad data, and load new data
into scale.
Error 6 You have pressed the PRT/* while the Printer Control Switch was in STOP mode.
Error 7 The RS-232C cable that you are using is not wired properly, possible break in the cable, or communications
error.
Error 8 Impossible to transfer PLU data between two scales. Remove unit price by pressing C key.
Error 9 You have an RS-232C communication error, please try again.
Error 10 The tare weight you entered was not valid: re-enter tare weight.
Error 11 The tare weight you entered was out of range.
Error 12 Loaded weight is below minimum weight of OIML regulation.
Error 14 You have pressed the PRT/* key after the label roll was exhausted. Exchange the label roll, press the C key
and release the error message. Adjust the initial printing state by pressing the FEED key. The label roll you
used was broken away from the interrupt sensor : replace the label roll between the two green sensor caps
and fix the label roll pin.
Error 15 You attempted to print a label when there is an issued label, please remove the issued one. You have
pressed PRT/* key when the printer front cover is not placed properly. You attempted to print a label when
the print head is in the lifted-up : push it down and it is issued a label paper automatically.
Zero range Error Initial weight is not valid. Make sure platter is properly installed
SCALE is not stable : scale is installed on a unstable place
dO CAL : Setup data is broken.
7. Specifications
MODEL LP-1.6, LP-1.6R
CAPACITY
TARE WEIGHT RANGE
DISPLAY
LAMP INDICATOR
MEMORY CAPACITY
PRINTING TYPE
LABEL & ROLL STOCK
CAPACITY (SIZE)
PRINTABLE WEIGHT
INTERFACE
POWER SOURCE
POWER CONSUMPTION
OPERATING TEMPERATURE
DIMENSION
NET WEIGHT
6 kg 15 kg 30 kg
UP TO 2.990 kg UP TO 5.990 kg UP TO 9.995 kg
WEIGHT (5) / UNIT PRICE (6) / TOTAL PRICE (7)
ZERO, TARE, SAVE, AUTO, SHIFT
4000 PLUs - 1000 MSGs
THERMAL DIRECT PRINT
1,000 LABELS (58mm 30mm) / 700 LABELS (58mm 40mm)
500 LABELS (58mm 50mm) / 400 LABELS (58mm 60mm)
NOT FOLLOWING OIML 4.17 FOLLOWING OIML 4.17
MANUAL
AUTO MODE
MANUAL
AUTO MODE
MODE MODE
OVER 0 kg OVER 2 DIGlT OVER 20 DIGIT
OVER 20
DIGIT
RS232C
AC 110V / 120V / 220V / 240V (50Hz / 60Hz)
MAX, 100W
-10 ~ +40
LP-1.6 LP-1.6(R)
410 430 195 410 430 595(R)
13kg