Multi-channel Analog Audio Playback:
If your DVD player supplies a multi-channel audio output (for DVD Audio or SACD playback), connect the output
(special cable sets for this are available from numerous sources) from your player to the input jacks labeled ANALOG
7.1 INPUT A or B on the rear panel of the Cinema 6. Be sure to match the connections left to left, right surround to right surround,
and so on. If your player includes a built-in Dolby Digital decoder and has 5.1 channel analog audio outputs we suggest that you
do not use them, but use the digital audio connection and the Cinema 6's internal decoders instead for better sound reproduction.
.
Video Display
A video display device such as a television monitor, Plasma TV, LCD display or video projector can be connected
to the Cinema 6 using the following methods.
Composite:
Connect the composite video input from the display to the composite video MONITOR OUTPUT jack
on the rear of the Cinema 6 using a 75 ohm RCA-type video cable.(Good Picture)
S-Video:
If there is an S-Video input on the display, connect it to the S-Video MONITOR OUTPUT jack on the rear of
the processor using an S-Video cable. S-Video delivers a better picture than composite video and should be used
whenever possible unless you can use component video connections, which deliver the best video playback.(Better Picture)
Component:
If the display has component video inputs, connect them to the Component Video Output jacks on the rear of the
Cinema 6 using a high quality component video cable set.(Best Picture)
NOTE:
The Cinema 6 does not upconvert composite video to S-Video. For OSD, make two types of connections between the
Cinema 6 and your video display. If component video connections are used also use either composite or S-Video
connections so that you are able to view the OSD on-screen menus and displays. During design we considered video
.
Composite:
Connect the composite video output from the satellite tuner or television to one of the video input jacks (TV)
on the rear of the Cinema 6 using an RCA-type video cable. (Good Picture)
S-Video:
If there is an S-Video output on the satellite tuner or television, connect it to one of the S-Video inputs (TV)
on the rear of the Cinema 6 using an S-Video cable.(Better Picture)
Component:
If the satellite tuner or television has component video outputs, connect them to one of the component video
input jacks ( TV) on the rear of the Cinema 6 using an appropriate cable set. (Best Picture)
Analog Audio:
Connect the L and R channel outputs on the satellite tuner or television to the set of audio input jacks (TV)
directly under the video jack used on the rear of the Cinema 6.
Digital Audio:
If your satellite tuner or television has a digital output jack, connect it to one of the coaxial (TV Coaxial) or
optical (TV Toslink) input jacks on the rear of the processor depending on the type of connector used by the device.
Installation
Satellite Tuner or Television
DVD
TV
CD
D-VCR
CD
DVD
S-VIDEO
COMPOSITE
VIDEO
LEFT
RIGHT
ANALOG AUDIO INPUT
DIGITAL INPUTS
S-VIDEO & COMPOSITE VIDEO
DVD
DVD
CD
CD
TV
TV
TUNER
MONITOR
1 OUTPUT 2
COMPONENT VIDEO
DVD
CD
TV
ANALOG 7.1 INPUT A
ANALOG 7.1 INPUT B
7.1 PREAMPLIFIER OUTPUT
RS 232
IR INPUT
1
ZONE 2
TRIGGERS
1
2
3
R
R
B
B
G
G
ZONE 2
VIDEO
OUT
ZONE 2
AUDIO
OUT
OSD
D-VCR
SL
FL
CEN
SBL
FR
SR
SW
SBR
FL
SL
CEN
SBL
FR
SR
SW
SBR
FL
SL
CEN
SBL
FR
SR
SW
SBR
HDCD
, High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or
trademarks of Pacific Microsonics, Inc. in the United States and /or other countries
.
HDCD system manufactured under license from Pacific Microsonics, Inc.
This product is covered by one or more of the following :
United States
5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,864,311 5,872,531
Australia
669114
Other patents pending.
Country
Patent No.
Manufactured under licensefrom Digital
Theater Systems,Inc. US Pat. Number
5,451,942, 5,956,674, 5,978,762 and
other world wide patents issued and
pending. "DTS"and "DTS Digital
Surround"are registered trademark of
Digital Theater Systems, Inc.
C 1996,2000 Digital Theater
Systems, Inc. All Rights Reserved
Manufactured under license from Doldy Laboratories."Doldy",
"Pro Logic"and the double-D symbol are trademarks of
Dolby Laboratories.Confidential Unpubished Works.
1992-1997 Dolby Laboratories,Inc.All rights reserved.
C
This device complies with part
15 of the FCC Rules.Operation
is subject to the following two
conditions:(1) This device may
not cause harmful interference,
and (2) this device must accept
any interference received,
including interference that may
cause undesired operation.
Power
Cinema 6 Surround Sound Processor
CARY AUDIO DESIGN,INC.
VIDEO
OUT
1
2
3
4
1
2
3
4
5
D-VCR
COMPONENT VIDEO OUTPUT
1
2
3
4
TV
D-VCR
S/N:
b
b
Unpublished Works.
1
3
2
4
1
2
3
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
+
+
+
+
+
+
+
-
-
-
-
-
-
-
RCA
RCA
RCA
RCA
RCA
RCA
RCA
XLR
XLR
XLR
XLR
XLR
XLR
XLR
AC IN
Trigger
Tip + / Ring -
+3.3/24VAC
Cary Audio Design, Inc., Apex, NC
CINEMA 7 Serial :
120V 50Hz/60Hz
240V 50Hz/60Hz 1200 Watts
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Warning! To reduce the risk of fire or electric shock,
do not expose this appliance to rain or moisture.
Warning! Hazardous energy. Make Proper speaker connections.
See owner's manual before using.
Connecting a multichannel power Amplifier
Upconverting but were not satisfied by current circuit possibilities and overall performance.
(13)
