Before making connections to any video devices, understand how the Cinema 6
routes the video portion of the signal through its video Section.
Any signal that appears at one of the composite video input jacks (DVD, CD, TV and D-VCR) is automatically sent to the
composite Video Monitor 1 and Monitor 2 OUT jacks only.
Any signal that appears at the S-Video input jacks (DVD, CD, TV and D-VCR) is automatically sent to the S-Video Monitor 1
And Monitor 2 OUT jacks only.
Any signal that appears at the component video (DVD, CD and TV) input jacks is automatically sent to the component
video MONIT OR OUT connection only.
NOTE: To provide the greatest signal flexibility, connect all available types of inputs and outputs from your video
devices. For example, if only the composite video output (Yellow RCA Jack) connection is made to your display
device, component sources will not be available for playback, even if they are connected to the Cinema 6.
DVD Player
Composite: Connect the composite video output from the DVD player to the DVD video input jack on the rear of the Cinema 6
using an RCA-type video cable. (Good Picture)
S-Video: If there is an S-Video output on the DVD player, and you have an S-Video input on your TV or monitor, connect it to the
S-Video DVD input on the rear of the Cinema 6 using an S-Video cable. S-Video delivers a better picture than composite video
and should be used whenever possible unless you can use component video, which offers the best video playback.(Better Picture)
Component: If the DVD player has component video outputs, connect them to the DVD component video input jacks on the rear
of the Cinema 6 using a high quality component video cable set. (Best Picture)
Analog Audio:Connect the L and R channel outputs on the DVD player to the DVD IN audio jacks on the rear of the Cinema 6.
Digital Audio:Connect one of the digital output jacks on the DVD player to one of the coaxial (DVD Coaxial) or optical
(DVD Toslink) input jacks on the rear of the processor, depending on the type of connector used by the DVD player.
DVD
TV
CD
D-VCR
CD
DVD
S-VIDEO
COMPOSITE
VIDEO
LEFT
RIGHT
ANALOG AUDIO INPUT
DIGITAL INPUTS
S-VIDEO & COMPOSITE VIDEO
DVD
DVD
CD
CD
TV
TV
TUNER
MONITOR
1 OUTPUT 2
COMPONENT VIDEO
DVD
CD
TV
ANALOG 7.1 INPUT A
ANALOG 7.1 INPUT B
7.1 PREAMPLIFIER OUTPUT
RS 232
IR INPUT
1
ZONE 2
TRIGGERS
1
2
3
R
R
B
B
G
G
ZONE 2
VIDEO
OUT
ZONE 2
AUDIO
OUT
OSD
D-VCR
SL
FL
CEN
SBL
FR
SR
SW
SBR
FL
SL
CEN
SBL
FR
SR
SW
SBR
FL
SL
CEN
SBL
FR
SR
SW
SBR
HDCD
, High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or
trademarks of Pacific Microsonics, Inc. in the United States and /or other countries
.
HDCD system manufactured under license from Pacific Microsonics, Inc.
This product is covered by one or more of the following :
United States
5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,864,311 5,872,531
Australia
669114
Other patents pending.
Country
Patent No.
Manufactured under licensefrom Digital
Theater Systems,Inc. US Pat. Number
5,451,942, 5,956,674, 5,978,762 and
other world wide patents issued and
pending. "DTS"and "DTS Digital
Surround"are registered trademark of
Digital Theater Systems, Inc.
C 1996,2000 Digital Theater
Systems, Inc. All Rights Reserved
Manufactured under license from Doldy Laboratories."Doldy",
"Pro Logic"and the double-D symbol are trademarks of
Dolby Laboratories.Confidential Unpubished Works.
1992-1997 Dolby Laboratories,Inc.All rights reserved.
C
This device complies with part
15 of the FCC Rules.Operation
is subject to the following two
conditions:(1) This device may
not cause harmful interference,
and (2) this device must accept
any interference received,
including interference that may
cause undesired operation.
Power
Cinema 6 Surround Sound Processor
CARY AUDIO DESIGN,INC.
VIDEO
OUT
1
2
3
4
1
2
3
4
5
D-VCR
COMPONENT VIDEO OUTPUT
1
2
3
4
TV
D-VCR
S/N:
b
b
Unpublished Works.
1
3
2
4
1
2
3
RIGHT LEFT
5.1 CH SURROUND ANALOG OUTPUT
TOSLINK
CARY AUDIO DESIGN, INC
DVD-6 DVD PLAYER
AC Power
S-VIDEO VIDEO
Cb
Cr
COMPONENT VIDEO
SL
SR
CNT
SW
LEFT
RIGHT
DOWNMIXED 2 CH
ANALOG OUTPUT
Apparatus Claims of U.S. Patent Nos.4,631,603 4,577,216 4,
819,098 and 4,907,093licensed for limited viewing uses only.
Manufactured under license from Doldy Laboratories."Doldy",
"Pro Logic"and the double-D symbol are trademarks of
Dolby Laboratories.Confidential Unpubished Works.
1992-1997 Dolby Laboratories,Inc.All rights reserved.
C
Complies with FDA radiation
performance standards,
21CFR Subchapter J
This device complies with part
15 of the FCC Rules.Operation
is subject to the following two
conditions:(1) This device may
not cause harmful interference,
and (2) this device must accept
any interference received,
including interference that may
cause undesired operation.
MADE IN CARY, NC, U. S. A.
HDCD
, High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or
trademarks of Pacific Microsonics, Inc. in the United States and /or other countries
.
HDCD system manufactured under license from Pacific Microsonics, Inc.
This product is covered by one or more of the following :
United States
5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,864,311 5,872,531
Australia
669114
Other patents pending.
Country
Patent No.
S-VIDEO
DIGITAL
OUTPUT
COAXIAL
Manufactured under licensefrom Digital
Theater Systems,Inc. US Pat. Number
5,451,942, 5,956,674, 5,978,762 and
other world wide patents issued and
pending. "DTS"and "DTS Digital
Surround"are registered trademark of
Digital Theater Systems, Inc.
C 1996,2000 Digital Theater
Systems, Inc. All Rights Reserved
VIDEO
Y
Progressive output
Rs232
RIGHT
LEFT
ANALOG OUTPUT
COAXIAL
TOSLINK
AC POWER
DIGITAL OUTPUT
CARY AUDIO DESIGN, INC.,
CD 308 HDCD PLAYER
MADE IN CARY, NC, USA.
HDCD
, High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or
trademarks of Pacific Microsonics, Inc. in the United States and /or other countries
.
HDCD system manufactured under license from Pacific Microsonics, Inc.
This product is covered by one or more of the following :
United States
5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,864,311 5,872,531
Australia
669114
Other patents pending.
Country
Patent No.
Complies with FDA radiation
performance standards,
21CFR Subchapter J
This device complies with part
15 of the FCC Rules.Operation
is subject to the following two
conditions:(1) This device may
not cause harmful interference,
and (2) this device must accept
any interference received,
including interference that may
cause undesired operation.
Installation
Connecting Audio Components
Connecting Audio Components
Analog
Digital
: Connect the L and R channel outputs on the CD player to the CD in jacks on the Cinema 6.
: If your CD player has a digital output jack, connect it to one of the coaxial (CD Coaxial) or optical (CD Toslink) input jacks
on the processor, depending on the type of connector used by the CD player. Later, you can use the remote control to select which
input to choose. For now, note which digital input you connected to on your system chart.(Do not Connect both!)
Connecting Video Components
Connecting Video Components
1.
2.
3.
NOTE:
Use either the Coaxial or Optical
connection,
.
Also, your video connection
requirements will vary according
to your DVD player and display's
capabilities. In most cases only
one type of video connection is
required.
but not both
(12)
