CARVIN XD360 Extreme Drive, Руководство по эксплуатации

Страница: 6 / 24

6
3. Rear Panel:
AC Power receptacle:
A standard IEC that will accept 90-250 VAC, 50-60Hz.
Ground Lift switch : Lifts the XD360 signal grounds to solve ground loop issues
in complex setups.
XLR inputs A, B, C: Connect to audio sources.
USB type B jack : For connection to a PC using Carvin’s XD360 control software
with a full screen graphic interface and for XD360 firmware updating.
XLR outputs 1, 2, 3, 4, 5, 6: Connect to audio inputs.
4. Front Panel:
SYSTEM , UTILITY , and EXIT
Enter to SYSTEM or UTILITY menus. Escape from the menus with EXIT.
PREV (Left) , NEXT (Right)
Selects which parameter to change or move to the next or previous page.
( Up ), ( Down )
Adjusts parameter value.
PAGE (SHIFT)
Hold and also press PREV or NEXT to skip one full page.