16
5. COMPUTER CONTROL / GRAPHIC INTERFACE
The XD360 has a USB port allowing use with Carvin’s XD™ software.
5.A. THE CARVIN XD™ SOFTWARE
MINIMUM COMPUTER SYSTEM REQUIREMENTS:
Windows XP or later.
SOFTWARE INSTALLATION:
Download the software from:
www.carvin.com/XD360
To install the XD360 software:
1. Unzip the files to a directory on your Hard Drive. There is 1 file: "Setup.exe"
2. Run the Setup.exe file to install the XD360 Serial Control software on your
computer.
3. The software will be installed to the
c:\Program Files\Carvin XD360
directory.
It is recommended to not change the install directory.
4. You will be asked if you would like a Desktop shortcut icon created. It is
recommended to do this to allow easy access to the program.
5. The XD360 software is now ready to use by double-clicking the XD360 Serial
Control icon on your desktop. When linking to the XD360 hardware, the device
should be connected via the USB cable and powered on before the software is
used.
5.B. SERIAL CONNECTION:
Connecting through USB.
Connecting the XD360 hardware:
1. You must plug in the USB cable to both the PC computer and the XD360
before you turn on the XD360.
2. Turn on the computer and wait to see the desktop.
3. Turn on the XD360.
4. Run the XD360 software on the computer.
5
.
Click on the “CONNECT TO DEVICE” button at the top middle of the screen.
- procedure continues on next page: selecting the COM port -
Содержание XD360 Extreme Drive
Страница 20: ...20 6 SAMPLE SETUPS BI AMP MONITORS ...
Страница 21: ...21 ...
Страница 23: ...23 CARVIN SPEAKER SETTINGS ...
Страница 24: ...24 _______________________________________________________________ ...