CARVIN XD360 Extreme Drive, Руководство по эксплуатации

Страница: 14 / 24

14
OUTPUT SCREEN PAGE 2:
Output # LPF frequency Filter type dB/oct.
OU
T
1 L P F 2 . 0 k H z B u t t e r 2 4
H P F 4 0 . 0 H z L i n k w z 4 8
HPF frequency Filter type dB/oct.
LOW PASS (LPF) and HIGH PASS (HPF) FILTERS
(CROSSOVER)
:
LPF:
Set the Low Pass Filter frequency (Hi Cut).
HPF: Set the High Pass Filter frequency (Low Cut).
Filter types:
BUTTER 6 : Butterworth 6db/octave slope (1
st
order)
BUTTER 12 : Butterworth 12db/octave slope (2
nd
order)
BUTTER 18 : Butterworth 18db/octave slope (3
rd
order)
BUTTER 24 : Butterworth 24db/octave slope (4
th
order)
BUTTER 48 : Butterworth 48db/octave slope (8
th
order)
BESSEL 12, or 24 : Bessel (2
nd
order) or (4
th
order)
LINKWZ 12, 24, or 48 : Linkwitz-Riley (2
nd
order), (4
th
order), (8
th
order)
OUTPUT SCREEN PAGE 3:
Output # Limiter threshold in dB
OU
T
1 L i m i t e r T h r e s h : + 0 1 . 0
D e l a y m S : 0 u S : 2 1
Delay in large units (mS) Delay in small units (uS)
LIMITER:
The Limiter is used to protect amplifiers, speakers and recordings by controlling
peaks in the signal output which would otherwise cause distortion and clipping.
Thresh : The Threshold level has a range from +18.0dB to -20.0dB .
Output levels less than the Threshold setting will not be affected.
DELAY:
The Delay time can be adjusted in large and small increments:
mS/uS (milliseconds/microseconds), Feet/Inches or Meters/mm .
(change units in the UTILITY menu).
The total amount of delay available for the XD360 is 120 milliseconds
(120ft./36.5M). Each time a delay is added, it deletes it from the total time
available for the system. For example, a simple Stereo system may have up to a
maximum of 63mS for each of the 2 inputs.
See next page for OUTPUT SCREEN PAGES 4, 5.