CARVIN XD360 Extreme Drive, Руководство по эксплуатации

Страница: 11 / 24

11
4.C. INPUT SETTINGS:
Pressing any INPUT SELECT button ( A , B or C ) will bring up that input’s screen
at any time, except if using the SYSTEM or UTILITY menus you must press EXIT
to escape.
Press the PREV / NEXT buttons to select a parameter to edit and then press the
Up / Down to change the value.
Holding the PAGE ( SHIFT ) button while pressing NEXT or PREV will skip to the
next full screen instead of passing through each parameter one at a time.
When you change from one input to another all the changes are saved in
memory.
INPUT SCREEN PAGE 1:
Input # Input name Input gain level
IN
A : M a i n L e f t G a i n : - 0 6 . 0
D e l a y m S : 1 2 1 u S : 9 0 5
Delay in large units (mS) Delay in small units (uS)
INPUT NAME:
To edit the INPUT NAME, press Left (Prev) (the cursor starts at GAIN),
then use LEFT / RIGHT to choose which character to edit, and press Up / Down to
change the character. The name is saved when leaving the screen.
GAIN:
To adjust the Gain (volume) of the selected input use the Up / Down buttons. The
range is 0db at maximum to -60db at minimum, in 0.5dB steps.
DELAY:
The Delay time can be adjusted in large and small increments:
mS/uS (milliseconds/microseconds), Feet/Inches or Meters/mm .
(change units in the UTILITY menu).
The total amount of delay available for the XD360 is 120 milliseconds
(120ft./36.5M). Each time a delay is added, it deletes it from the total time
available for the system. For example, a Stereo system may have up to a
maximum of 63mS for each of the 2 inputs.
See next page for INPUT SCREEN PAGE 2, 3, 4.