Carver 45 COCKPIT MOTOR, Руководство пользователя

Страница: 51 / 141

4537 • C3 7/06 39
AC ELECTRICAL SYSTEM SECTION 3
Operating AC Equipment
Power to your boat’s AC components is controlled by circuit breakers and, in
most cases, individual controls for each component.
Your boat contains two AC circuit breaker panels:
• AC Main Circuit Breaker Groups
• AC Control Center
The circuit breakers on these panels enable you to control the electricity to
either the AC component itself or to the component’s controls by switching
the breakers “ON” or “OFF”. They also protect the electrical system by
automatically disconnecting the circuit from the power source in the event of a
short or overload. Power is supplied to these two circuit breaker panels by either
a shore power source or the optional generator.
Never reset a breaker that has been automatically tripped without first
correcting the problem. Failure to follow this procedure may create a
dangerous situation.
NOTE: Sometimes a circuit breaker location is labeled but no circuit breaker is
present. In this case, the component named on the label is an option that is not
installed on your boat.
AC Main Circuit Breaker Groups
All AC power is routed through an AC Main circuit breaker group before it
enters your boat. If your boat has the optional air conditioning system, there
is a second AC Main circuit breaker group for that system. The circuit breaker
groups are located in a locker on the port transom. When the AC Main circuit
breaker groups are “ON,” the power then flows to the AC Control Center.