KGAET0201ETK: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
13
L12F028
Fig. 11 – Application of Trap Kit to Combustion Air Pipe Located Above Furnace
L12F029
Fig. 12 – Combustion Air and Vent Pipe Diameter Transition Location and Elbow Configuration
Representative drawing only, some models may vary in appearance
TO CODE--APPROVED DRAIN OR CONDENSATE PUMP
Two inch pipe shown. When another size pipe is used,
discard the 2-in. tee in the kit and use a field supplied tee
that is the same diameter as the pipe being used.
Representative drawing only, some models may vary in appearance
AIR
FLOW