Carotron RCP200 Series, Инструкция по эксплуатации

Страница: 4 / 26

General Description
The Carotron RCP200 Series controllers provide full range, four quadrant speed control or torque control
of shunt wound or permanent magnet D.C. motors from 1/4 to 5 horsepower. Many features are
standard on the RCP200 Series.
Isolated Control Circuit
Operation from 115 or 230 VAC input for 90 or 180 VDC motor armatures.
Switch selectable armature voltage or tachometer voltage feedback.
7 or 50 VDC per thousand RPM feedback tachometer input selectable by programing jumper.
Independently adjustable Forward Acceleration, Forward Deceleration, Reverse Acceleration and
Reverse Deceleration. Each direction has two time ranges selectable by programing jumper.
Single contact stopping by any of three methods:
1. Coast to stop
2. Controlled deceleration to stop
3. Rapid stop (in current limit)
A hard firing, high frequency multipulse gating circuit.
I.C. regulated power supplies, metal film resistors and cermet potentiometers for stable operation
under varying conditions of temperature and line voltage.
On board A.C. line fuses.
Oversized power handling components.
Line transient suppression by MOV and RC snubber.
Inner current loop type control circuit for fast and stable response under varying load conditions.
Specifications & Technical Data
2.1 Electrical
A.C. Input
115 VAC ± 10%, 50/60 Hz ± 2%
230 VAC ± 10%, 50/60 Hz ± 2%
Armature Output
0 – 90 VDC for 115 VAC input
0 – 180 VDC for 230 VAC input
Field Output
100 VDC @ 1 Amp for 115 VAC input
200 VDC @ 1 Amp for 230 VAC input
Horsepower Range
Model RCP202: 1/4 – 1 HP @ 90 VDC
1/2 – 2 HP @ 180 VDC
Model RCP205: 1/4 – 1 HP @ 90 VDC
1/2 – 5 HP @ 180 VDC
1
2
Carotron RCP200 Series Page 4