Carotron RCP200 Series, Инструкция по эксплуатации

Страница: 16 / 26

The Summing Input Signal should not exceed ± 10VDC. This input signal sums with the REF IN Signal
connected to TB1–2. Both Input signals are referenced to Circuit Common at TB1-1. Like Polarity Signals
will add Together and unlike Polarity Signals will subtract or offset each other.
Example: +5VDC at TB1–2 and +5VDC at TB1–3 would cause approximately the same output as +10VDC
at either single input. +10VDC at TB1–2 and -5VDC at TB1–3 would cause approximately the same output
as +5VDC at either single input.
Carotron RCP200 Series Page 16