Carotron RCP200 Series, Инструкция по эксплуатации

Страница: 17 / 26

Carotron RCP200 Series Page 17
The Summing Input Signal should not
exceed ±10 VDC. Signal connected to TB1-2.
Both Input signals are referenced to Circuit
Common at TB1-1. Like Polarity Signals will
add together and unlike Polarity Signals will
subtract or offset each other.
Example: +5 VDC at TB1-2 and +5 VDC at
TB1-3 would cause approximately the
same output as +10 VDC at either single
input. +10 VDC at TB1-2 and -5 VDC at
TB1-3 would cause approximately the
same output as +5 VDC at either single
input.