INVISI
™
SERIES II
INVISI
™
SERIES II
Installing the Tank -
237 061
Where removal of the tank may be required.
Where adjustment of the tank height is required.
Installing the Tank -
237 061
Induct Access
Caroma Invisi II Integrated
Wall Hung Bowl Bracket
Finished Floor Level
15.75" - 16.5"
(400mm - 420mm)
Datum A
Access box converted
to top (refer to page 11)
Accurate positioning of the soil pipe
relative to studwork is essential
WP support
& flange nut
assembly, use
as required
6.7" (170mm) Max. from finished wall with the
waste pipe provided with this pack
5.3"
(135mm)
Max. with
Supplied flush pipe
Ensure at least 300mm
clearance above top of
tank for service access
Height to
centre of the
selected bowl's
waste outlet
Centre line buttons
(standard mounting)
1.8"
(45mm) – Water supply connection
22.9"
(582mm)
Supplied
to centre of inlet
(adjustable from 16.2" - 22.9"
or 412mm - 582mm)
Height to
centre of the
selected bowl's inlet
Waste Pipe Adjustment
Allows for the 4" (100mm) soil pipe being
set back from the wall face up to 1" (25mm).
1
2
3
Installing the Tank -
237 061
Where removal of the tank may be required.
Where adjustment of the tank height is required.
9
Locator
Remove tank from Bowl Bracket using
a screw driver to lever the plastic tab out
of the hole in the Metal Arm, both sides.
If the Height of the tank is to be lowered,
cut the Flush Pipe and chamfer the
inside edge.
Cut the Metal Arms on the Bowl Bracket
as low as possible.
Lubricate ‘O’ Ring on tank tail using soapy
water & slide Flush Pipe on.
Ensure the Flush Pipe is correctly
positioned on the Bowl Bracket.
Continue with installation.
Metal Arm
