Caroma Invisi Series II Скачать руководство пользователя

Страница: 5 / 16

INVISI

™

SERIES II

INVISI

™

SERIES II

Button Service Access Options

Direct Panel Mounting - Front

This is suitable for use with any of the

button panel kits.

Requires a 0.2" (5mm) minimum -

1.8" (45mm) maximum wall thickness.

Access to the tank internals is

provided through the panel window.

Remote Panel Mounting

This is suitable for use with any of the

button panel kits.

Requires a 0.2" (5mm) minimum -

1.8" (45mm) maximum wall thickness.

A Blank Access Panel is required for

inwall access to tank internals.

Remote Button Mounting

Access to the rear of the buttons must

be provided for servicing.

Suitable for mounting through panels

up to 2.2" (55mm) thick.

A Blank Access Panel is required for

inwall access to tank internals.

Care Button Panel

A Care Button Panel is available for

use in ADA applications.

Direct Panel Mounting - Top

This is suitable for use with any of the

button panel kits.

Requires a 0.2"(5mm) minimum -

1.8" (45mm) maximum wall thickness.

Access to the tank internals is

provided through the panel window.

Содержание Invisi Series II

















Результаты поиска

Содержание Invisi Series II

Отзывы:

Похожие инструкции для Invisi Series II

Бренды по названию

Популярные бренды

Caroma Invisi Series II, Руководство пользователя

Результаты поиска

Содержание Invisi Series II

Отзывы:

Похожие инструкции для Invisi Series II

Бренды по названию

Популярные бренды