Carlton SP8018, Руководство пользователя, Страница: 33 / 96

SP8018 MACHINE OPERATION
START ENGINE
•
Start engine. Turn the ignition key
switch clockwise one stop (On position)
to turn the electrical system on. The key
should remain in the on position while
the engine is running. Turn the key fully
clockwise (Start position) this will start
the engine. To shut off the engine, return
the key to the off position. (Refer to the
engine manufacturer’s manual for
specific engine controls and operation.)
If the engine doesn’t start right away and
you have to restart it, turn the key switch
OFF and back ON. Make sure the light
on the transmitter is still on and restart
the engine by turning the key. If you lose
the connection (light off), repeat the
procedure from the beginning and
perform each step exactly as described.
•
Start engine at half speed and allow
enough time for oil to circulate before
proceeding.
OPERATING MACHINE
•
Test controls for proper operation. Note:
The GEAR and/or FLOW controls on
the remote should be in LOW for proper
cutter head function. (Refer to Machine
Controls section for more details on
controls.)
•
Position machine at stump with cutter
wheel a slight distance away from the
stump.
CAUTION
Cutter wheel should be disengaged when
positioning machine near stump. Hitting the
stump with the cutter wheel running will break
the Poly Chain® belt.
IGNITION KEY SWITCH
20