Carlton SP8018, Руководство пользователя, Страница: 23 / 96

SP8018 MACHINE CONTROLS
HYDRAULIC CONTROLS
Your track machine has a series of hydraulic controls located on the machine control panel
and radio transmitter, which are clearly marked for use. To operate, push levers/toggle
switches in the direction of the command you want to perform. See illustrations and details
below.
•
RIGHT TRACK (FWD/REV)
(Shown as R. TRACK-FORWARD /
REVERSE on Remote.) This switch
operates only the right track drive motor.
•
LEFT TRACK (FWD/REV)
(Shown as L. TRACK-FORWARD /
REVERSE on Remote.) This switch
operates only the left track drive motor.
➢
Use both controls in the same direction
(
FWD/FWD or REV/REV
) to move machine
forward or reverse. The radio transmitter also
has a single switch (
BOTH TRACKS
) that will
move both tracks at the same time in the forward
or reverse directions.
➢
Use controls opposite (
REV/FWD or FWD/REV
)
of each other to turn machine either right or left.
When rotating the machine, try not to leave one
track stationary while rotating the other one
around as this could cause the machine to jump a
track. If it is desired to spin the machine,
counter-rotate the tracks.
•
BLADE (UP/DOWN)
This switch raises and lowers the push blade
at the front of the machine.
10