Carlton Solid State Logic SL 9000 J Series, Руководство по установке

Страница: 13 / 58

Console to Rack Equipment Interconnection
Network : RJ45 10baseT connection from console rear panel to the 9000 J
processor main connector panel. Standard cable length is 15m.
Video Monitors: Analogue RGB and TTL sync connected by 75 Ohm coaxial
cable. RGB terminated internally at the monitor. It is not
possible to ‘feed-through’ the console monitors (see Page 19).
See Page 19 for information on Video and Sync levels.
Analogue Computer 50-way MDR/MDR cables. Number depends on console size. 1
Control : per 8 channel bay. Standard length 10m. Maximum Length 25m.
Computer Interrupt 50-way MDR/MDR cables. Number depends on console size. 1
& Enable Control : per 24 channels, plus two for centre section. Standard length
10m. Maximum Length 25m.
9000 J Processor
Height : 12U
Max Depth : 475mm (excluding cabling)
Mounting : Rack mounted shelves
Weight : 35kg approximate
Voltage : 100-120 VAC/220-240 VAC, selectable at the back panel
Power : Less than 300W continuous, 400W Max.
Cooling : Front-to-back fan assisted. Allow adequate clearance for
exhaust.
Air filter : 2 part filters mounted onto clip-on trim door. Periodic changing
is required to ensure correct airflow.
Very High Density 3M™ MDR connectors based on Centronics style of contacts, 50-
Connectors : way. These used for Processor to Console Automation control.
They are located on cards inside the processor rack.
Connections are made by routing the MDR cables through from
the rear of the processor rack to the appropriate Input card.
Cables are clamped at the rear of the processor crate.
5
13.7.99
Specifications