Carlton 1712, Руководство пользователя

Страница: 67 / 165

12” CHIPPER MACHINE OPERATION
41
WINCH OPERATION
(OPTIONAL EQUIPMENT)
When a tree is too large to carry to the
chipper, use the winch to pull the tree into
the infeed chute.
1. Put the feed control bar in the middle
(stop) position and rotate the winch
selector valve counter-clockwise to
engage the winch circuit. The feed
wheels should not turn when the winch
circuit is engaged. DO NOT operate the
winch if the feed wheels still turn.
Contact J. P. Carlton or the local dealer
for service.
2. Put the winch in free spool by putting
both levers on the winch drum in FREE.
(The levers may be in any position but
the correct words must be facing away
from the winch drum to perform the
function. See Machine Control section
or decal on chipper for lever operation.)
ONLY USE THE WINCH TO DRAG
MATERIAL TO THE CHIPPER
THAT IS GOING TO BE CHIPPED.
NEVER USE THE CHIPPER
WINCH TO SECURE OR HOLD
LOADS.