Carlton 1712, Руководство пользователя

Страница: 59 / 165

12” CHIPPER MACHINE OPERATION
33
AIM DISCHARGE CHUTE
•
Carlton Chippers are equipped with a
rotating discharge chute. To rotate the
chute to the desired position
1. Pull down and unlock the rotation
lock pin
2. Turn the discharge chute using bar to
rotate the discharge chute to desired
position
3. Release the lock pin making sure it
engages in one of the lock grooves
on the discharge chute securing the
chute in desired position.
ALWAYS MAKE SURE THE DISCHARGE IS
POINTED IN A CLEAR DIRECTION FOR
DISCHARGE OF CHIPS
NEVER ROTATE DISCHARGE CHUTE
WHILE CHIPPER IS IN OPERATION OR
WHILE THE CUTTER DISK IS SPINNING
•
There is an adjustable flap on the end of
the discharge chute. This flap is
adjustable in the vertical direction to
help control the height and distance of
the chips being discharged.
NEVER ADJUST THIS FLAP WHILE
CHIPPER IS IN OPERATION OR WHILE
THE CUTTER DISK IS SPINNING
•
Stay clear of discharge zone when
running chipper. Never allow anyone
to stand near or to walk close to the
discharge zone, even if being
discharged into a bin or truck.
•
Airborne debris may cause severe
injury. If inspection of chipped
material is required, shut down the
machine first.
•
Discharge spout should not be pointed
toward people, buildings, or other
personal property that may be injured
or damaged. Airborne debris is as
dangerous as any powerful projectile.
•
Never position, adjust, or move the
discharge chute while the chipper or
the cutter disk is running
3
2
LOCK GROOVES
1