Carlton 1712, Руководство пользователя

Страница: 57 / 165

12” CHIPPER MACHINE OPERATION
31
STARTING – READ THIS MANUAL, THE ENGINE OWNERS’ MANUAL, THE
CLUTCH MANUAL, AND ALL SAFETY DECALS ON CHIPPER
BEFORE STARTING.
SAFETY:
•
DO NOT ALLOW CHILDREN OR OTHER SPECTATORS TO STAND AND
WATCH THE CHIPPER IN OPERATION. ALL OPERATORS MUST WEAR
RECOMMENDED PROTECTIVE EQUIPMENT.
•
DO NOT ALLOW ANYONE TO BE IN CHIP DISCHARGE ZONE WHILE
MACHIINE IS RUNNING.
•
NEVER REACH OR KICK INTO THE INFEED CHUTE FOR ANY REASON.
•
KEEP CHIPPER HOOD CLOSED WHILE MACHINE IS RUNNING. ALWAYS
MAKE SURE CUTTER DISK HOOD HAS LATCH PIN IN POSITION AND
LOCKED WITH A PADLOCK, AND IS NOT CAPABLE OF BEING OPENED.
•
AN OPERATOR MUST ALWAYS BE IN POSITION AND BE PREPARED TO
OPERATE THE FEED CONTROL BAR TO REVERSE OR STOP THE FEED
WHEELS IF NECESSARY.
•
ALWAYS BE ATTENTIVE AND AWARE OF THE CHIPPERS OPERATION AND
NEVER ALLOW YOURSELF OR ANYONE TO BECOME PULLED INTO THE
FEED WHEELS.
•
ALWAYS LOAD SHORT PIECES OF BRUSH ON TOP OF LONGER PIECES OF
WOOD AND BRUSH. NEVER FEED LONG VINE TYPE MATERIAL INTO
CHIPPER. ALWAYS CUT INTO SHORT PIECES TO FEED VINE TYPE
MATERIAL. THIS MATERIAL COULD TANGLE AND WRAP AROUND
SOMEONE OR SOMETHING AND PULL IT INTO THE CHIPPER.
•
NEVER OPERATE MACHINERY WHILE UNDER THE INFLUENCE OF
ALCOHOL OR DRUGS, (PRESCRIPTION, OVER THE COUNTER OR OTHERS).
START-UP PROCEDURES:
•
Check all fluids before starting.
•
Daily Checklist must be completed before starting.
•
PTO/Clutch must be disengaged before starting.
•
Cutter disk hood and all other guards must be in place and secured properly before starting.
•
All personnel must be wearing protective equipment: eye and ear protection; hard hat; short
fitted gloves without cuffs; long sleeve shirt; long pants without cuffs; and over the ankle
work boots with skid resistant soles.
•
Use wheel chocks to block the chipper tires so that the chipper doesn’t move, shift, or roll
during operation.
ALWAYS KEEP A FIRST
AID KIT AND A FIRE
EXTINGUISHER WITH
CHIPPER