18
CARLOTTI G.&C. Snc
VIA GHIARADINO 2
–
40054 VEDRANA DI BUDRIO (BO) ITALIA
TEL: +39 051 6929011 FAX: +39 051 6929110
•
Replacement of the used oil or the top-up operations must be carried out under conditions
of maximum safety and hygiene to avoid a situation whereby approximate operations or
unsuitable technical means produce spills on the ground and in the water.
•
The used oil must be stored, before being transferred to the company responsible for
collection, in suitable containers to store it in suitable conditions, eliminating the risks of
breakage and spillage.
1- TOPPING UP THE TANK:
Before topping up the tank, the operator must:
•
Place the machine on the ground on perfectly level ground.
•
Disconnect the machine from the tractor.
•
Top up until the level indicator is reached
Never exceed the maximum permitted level
Usually the oil temperature in continuous working conditions is between 50°C and 60°C, if the
value should change dramatically, contact the service centre, local distributor or directly the
company CARLOTTI G C S.n.c.
2- TOPPING UP THE GEARBOX:
Before topping up the gearbox, the operator must:
•
Place the machine on the ground on perfectly level ground.
•
Disconnect the machine from the tractor.
•
Top up until the aluminium visual indicator light shows the level.
Never exceed the maximum permitted level
Do not disperse the used oil !! This is a serious form of environmental pollution !!
Used oil damages the environment and can be harmful to health so it must be stored in special
containers and for subsequent disposal through appropriate collection centres, recording all
movements and transportation (as required by the specific legislation)
5.5 Storage
During periods of non-use, the GREEN 650/5 L must be stored in an enclosed area, protected from
the action of weathering. It is advisable to position it in such a way that it is not dangerous for
property or persons.
It must be placed securely from a static point of view, to avoid tipping, overturning and to facilitate
hooking and unhooking operations.
After the working season, the qualified technician assigned to the machine must:
•
Clean it from soil debris, dust and other impurities;
•
Proceed with a technical service and repair any damage;
•
Lubricate each point as indicated in paragraph 5.2 and 5.3;
•
Clean the unpainted metal parts, wash them with kerosene and cover them with anti-
corrosive grease or other protective agents;
•
Loosen the tension of the tracks and belts;
ATTENTION
