17
CARLOTTI G.&C. Snc
VIA GHIARADINO 2
–
40054 VEDRANA DI BUDRIO (BO) ITALIA
TEL: +39 051 6929011 FAX: +39 051 6929110
All the maintenance, adjustment and lubrication operations must be carried out with the
machine stationary, not connected to the tractor and resting on the support foot on level
ground. Do not perform this type of operation on slopes or in other places that do not ensure
total stability of the machine.
5.1 Daily maintenance
Every day, after using the GREEN 650/5 L machine:
•
Clean the machine from residues of earth, dust and leaves.
•
Perform a general service of the machine paying particular attention to the oil level (in the
tank in the gearbox and in the reducer) and top up if necessary; check the rollers, belts and
front plowshares.
•
Damaged items must be immediately replaced or repaired.
5.2 Lubrication
•
Always read the warnings and precautions indicated on the lubricant packs.
•
Always use gloves for hand protection.
•
Before lubricating, it is necessary to carefully clean the grease nipples to prevent mud, dust
or other foreign bodies from mixing with the grease, decreasing or even cancelling the effect
of lubrication.
•
Avoid any contact with the skin.
•
Wash hands thoroughly after use.
For lubrication, use only the recommended products:
•
Hydraulic oil: HYDRAULIC OIL 46
to fill up the tank
•
Oil for changing: 80W90
to fill up the gearbox and reducer
•
Grease: GRIS 30 for the supports/rollers
5.3 Greasing
•
Daily grease both guide rollers of the collecting belt (Fig. 15)
•
Grease the supports daily in moderation (Fig. 16)
5.4 Changing the oil/top up
•
Make changes only inside the workshop, if any, or in specifically designated places. In any
case, the flooring should be waterproof.
Fig. 15
Guide rollers
Fig. 16
–
Supports
