DISxRSE Car Park Display
– Configuration manual
45
Appendix
Firmware upgrade
To upgrade the DISxRSE firmware, follow the procedure below:
Step
Action
1
Execute the
BootLoaderApp.exe
2
Tick the
Enable
box in the
Ethernet
section.
Enter the DISxRSE IP address and click on the
Connect
button.
Note: the default IP address is
192.168.1.201
3
Click on the
Load Hex File
button and select the file
Firmware.hex
4
Click on the
Erase-Program-Verify
button to start the upgrade: it takes less than 30
seconds.
When uploading firmware, do not interrupt the application by closing the window.
5
Click on the
Run Application
button, then click on the Disconnect button.