DISxRSE Car Park Display
– Configuration manual
18
Procedures
Connect the display to the SBP2DI48524 interface
5. Connection diagram
Follow this procedure to connect the 4-wire cable between the display and the interface:
Step
Action
1
Connect the 24V dc power supply unit to the A1(+) A2(-) terminals on the
SBP2DI48524 display interface.
2
Connect the display to the SBP2DI48524 module by using the 4-wire cable:
Wire colour
SBP2DI48524 terminal
Black
GND
White
A (-)
Yellow
B (+)
Red
+24 V
Make sure the connection is correct!
The device will be damaged if the Voltage supply is connected
to the A(-) or (B+) terminals.
3
Connect the Dupline wires to the Dupline Master channel of the system.
4
Power the system ON.
•
Displays require obstruction-free space for adequate air ventilation between
solid mounting surfaces and the top and bottom surfaces.
•
In outdoor applications, the display must be installed at a deviation angle of
maximum ± 5° from the ceiling surface: this prevent water infiltration.