DISxRSE Car Park Display
– Configuration manual
22
Network configuration
The following chapter describes the procedures to change the network parameters and set the
display with a static or a dynamic IP address.
In case of problems, please refer to
The display and the computer / network that will communicate with the
display must have IP addresses in the same range.
Procedures
Set a static IP address to the display
Follow this procedure to set the display with a static IP address.
Step
Action
1
Click on the
Network configuration
tab.
2
In the
IP address
field,
type the
new
IP address you want to assign.
3
In the
Gateway
field,
select the gateway server.
4
In the
Subnet Mask
field, select the subnet mask of the network.
5
In the
Primary
and
Secondary DNS
fields, set the DNS servers.
6
Click on the
Save Configuration
to store the changes.
Note:
When you change the network parameters, the display is restarted, and you are redirected to the
Reboot page.
The new IP address appears on the DISxRSE display during the start-up.