manualshive.com logo in svg

CARLO GAVAZZI CERTUS, Руководство по установке

Поделиться
Скачать
CARLO GAVAZZI CERTUS Скачать руководство пользователя страница 62

62 

Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 07/18

Password Protection

The CCS requests a password in order to upload and save the project.

⇒

 

The password entered as default must be modified to avoid manipulation (level 2 password) 
or so that the configuration loaded on Certus (level 1 password) is not visible.

All operators using the CMM system must have a Level 1 PASSWORD.
This password allows only to view the LOG file, composition of the system and MONITOR in 
real time and upload operations.
The first time the system is initialised the operator must use the password “” (ENTER key).

Designers who know the level 2 password can enter a new level 1 password (alphanumerical,
max 8 characters).

Level 1 Password

⇒

 

Operators who know this password are enabled to upload (from CMM to PC), modify 
or save the project.

Designers authorised to work on the creation of the project must know a Level 2 PASSWORD. 
The first time the system is initialised the operator must use the password “SAFEPASS” (all capital 
letters).
Designers who know the level 2 password can enter a new level 2 password (alphanumerical, max 
8 characters).

Level 2 Password

⇒

 

This password enables the project to be uploaded (from PC to CMM), modified and 
saved. In other words, it allows total control of the PC => Certus system.

⇒

 

When a new project is UPLOADED the level 2 password could be changed.

⇒ 

Should you forget either of these passwords, please contact Carlo Gavazzi which 

will provide an unlock file (when the unlock file is saved in the right directory the icon        
will appear on the toolbar). When the icon is activated, the password level 1 and level 

2 are restored to their original values. This password is only given to the designer and 
can only be used once.

To activate the PASSWORD Change use icon       , after connecting with Level 2 Password. A window 
appears (Figure 40) allowing the choice of the new password; insert the old and new passwords in 
the appropriate fields (max 8 characters). Click OK.
At the end of the operation disconnect to restart the system.
If CMC is present the new password is also saved in it.

Password Change

CERTUS Installation Manual

Содержание CERTUS































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды