EN
These Sprayguns are suitable for use with both water-based and solvent-based coating materials.
They are not designed for use with highly corrosive and/or abrasive materials and if used with such
materials it must be expected that the need for cleaning and/or replacement of parts will be increased.
If there is any doubt regarding the suitability of a specific material, contact your DeVilbiss Distributor
or Carlisle Fluid Technologies direct.
NOTE:
This gun is not to be used with halogenated hydrocarbon solvents or cleaning agents such as 1,1,1,-
Trichloroethane or methylene chloride. These solvents can react with the aluminium components used
in this gun. The reaction can become violent and lead to an equipment explosion.
3.5 - 6 bar [51 - 87 psi]
15 bar [217 psi]
12 bar [174 psi]
P3 = Cylinder Air Pressure
P2 = Max Fluid Input/Recirculation Pressure
P1 = Max Air Input Pressure
FUNCTIONAL DESCRIPTION
SPECIFICATIONS
FLUID AND AIR INLET PRESSURES
ENVIRONMENTAL
MATERIALS OF CONSTRUCTION
Gun Head and Fluid Passageways
P1 = Air Inlet Size
120 x 46 x 46
Electroless Nickel Plated Brass
Gun Body Material
Air Cap Material
MANIFOLD CONNECTIONS
P3 = Cylinder Inlet
P2 = Fluid Inlet Size
Max Ambient Operating Temperature
Fluid Tip and Needle Construction
Stainless Steel 303
Stainless Steel 303
Acetal Needle Tip
Polyethylene
Viton Extreme
1/8" BSP
1/8" BSP
1/8" BSP
WEIGHT
Seals and O-Rings
646g
L x H x W mm
Gun only
Gun + Intermediate Plate
715g
Anodised Aluminium
DIMENSIONS - Gun only
40°C Nominal [104°F]
960g
Gun + Intermediate Plate + Machine Adaptor
SB-E-2-990 R6.0
2/24
www.carlisleft.com
