Carlisle DeVILBISS AGMDPRO-102-HV30C-K Скачать руководство пользователя

Страница: 24 / 24

China

Tel: +8621-3373 0108

Fax: +8621-3373 0308

Japan

Tel: +81 45 785 6421

Fax: +81 45 785 6517

Australia

For specific warranty information please contact Carlisle Fluid Technologies.

Tel: +61 (0) 2 8525 7555

Fax: +61 (0) 2 8525 7575

For the latest information about our products, visit www.carlisleft.com

For technical assistance or to locate an authorised distributor, contact one of our international sales and

customer support locations below.

Region

Industrial / Automotive

Automotive Refinishing

Americas

Tel: 1-888-992-4657

Fax: 1-888-246-5732

Tel: 1-800-445-3988

Fax: 1-800-445-6643

Europe, Africa,

Middle East,

India

Tel: +44 (0)1202 571 111

Fax: +44 (0)1202 573 488

Carlisle Fluid Technologies is a global leader in innovative finishing technologies.

Carlisle Fluid Technologies reserves the right to modify equipment specifications without prior notice.

DeVilbiss®, Ransburg®, MS®, BGK®, and Binks® are registered trademarks of Carlisle Fluid

Technologies, Inc.

WARRANTY POLICY

This product is covered by Carlisle Fluid Technologies’ materials and workmanship limited

warranty. The use of any parts or accessories, from a source other than Carlisle Fluid

Technologies, will void all warranties. Failure to reasonably follow any maintenance

guidance provided, may invalidate any warranty.

SB-E-2-990 R6.0

24/24

www.carlisleft.com

Содержание DeVILBISS AGMDPRO-102-HV30C-K

























Результаты поиска

Содержание DeVILBISS AGMDPRO-102-HV30C-K

Отзывы:

Похожие инструкции для DeVILBISS AGMDPRO-102-HV30C-K

Бренды по названию

Популярные бренды

Carlisle DeVILBISS AGMDPRO-102-HV30C-K, Руководство по обслуживанию

Результаты поиска

Содержание DeVILBISS AGMDPRO-102-HV30C-K

Отзывы:

Похожие инструкции для DeVILBISS AGMDPRO-102-HV30C-K

Бренды по названию

Популярные бренды