Carlisle BGK AutoCure 6000-2216, Сборка и руководство по эксплуатации

Страница: 7 / 57

LAMPS
All lamp end covers and grills must be installed before operating and using the repair arms to avoid
electrical shock.
The lamps of the repair arms have similarities to a standard incandescent light bulb. During the
repair arm curing cycle, the repair arm lamps can sometimes emit bright light similar to a standard
incandescent light bulb. As you would with an incandescent light bulb, we high recommend you
DO NOT STARE DIRECTLY INTO THE BRIGHT LIGHT.
DO NOT HANDLE INFRARED LAMPS WITH BARE HANDS. Remove any contamination with
alcohol and a clean, soft cloth. Contamination on quartz tubes allows the quartz to overheat, which
leads to premature lamp failure.
PYROMETER POSITIONING BEAM
A class 2 laser emits in the visible region (635-870mN) at 1mW of power. The blink reflex of the
human eye (aversion response) will prevent eye damage, unless the person deliberately stares
into the beam for an extended period. DO NOT STARE INTO THE BEAM.
ENVIRONMENT
Heater head contains high voltage connections that are open to atmosphere. These units are not
air-purged. Ensure use of unit is acceptable in the area in which it will be used.