Options
Vita II
62
Operating manual
11.18
1
Print start and cut (Input)
2*
Error reset (Input)
3*
Number of the file to load Bit 0 (Input)
4*
Number of the file to load Bit 1 (Input)
5*
Number of the file to load 2 (Input)
6*
Number of the file to load 3 (Input)
7*
Number of the file to load 4 (Input)
8*
Number of the file to load 5 (Input)
9
Error (Output)
10
Print order active (Output)
11
Dispenser photocell:
Label exists at dispenser photocell (Output)
12
Printing (Output)
13
Ready (Output)
14
No function
15
Option scanner only: Bar code not readable (Output)
16
Transfer ribbon prior warning (Output)
*
The files must be saved onto the CF card in the user directory (see
chapter 9.4, page 80.
The files must start with 1 or 2 digits (1_Etikett.prn, 02_Etikett.prn).
The files can be saved with a file extension.
In the printer status 'ready', 'waiting' or 'stop', a new file can be loaded.
The printer order will be started after charging and an already existing
printer order will be deleted.
The input signal 000000 does not charge a file and does not delete an
already existing print order.
1
Print start and cut (Input)
2
Reprint last printed label (Input)
3
Counter reset (Input)
4
Option applicator only: Start application (Input)
5
Error reset (Input)
6
Cancel all print jobs (Input)
7
No function
8
No function
9
Error (Output)
10
Print order active (Output)
11
Dispenser photocell:
Label exists at dispenser photocell (Output)
12
Printing (Output)
13
Ready (Output)
14
Option applicator only: Ready for application (Output)
15
Option applicator only: Pad is in printing position (Output)
16
Transfer ribbon prior warning (Output)
List of registered
functions for
StdFileSetLabel
List of registered
functions for
APL
