Carl Valentin DPM III XI Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 96

Carl Valentin DPM III XI Скачать руководство пользователя страница 86

Additional Information

DPM III xi series

86

Operating manual

04.18

12.2 Hotstart

NOTICE!

The data is saved onto CF card. Therefore the CF card is a
condition for the

Hotstart

menu item.

The function hotstart contains e.g. that in case of a power failure the
currently loaded layout can be further processed without any loss of
data.

Moreover a print order can be interrupted and to be continued after
switching on the printer anew.

NOTICE!

At an active hotstart all necessary data is stored on the
Compact Flash therefore do not remove the card during
operation. When removing during operation, this causes the
loss of all data on the Compact Flash Card.

In case the hotstart function is set to on, at the start of a print order the
data of the current layout is saved to the corresponding directory of
the Compact Flash card.

However the following conditions have to be fulfilled:



Compact Flash card inserted in drive A



Compact Flash card not write protected



Enough free storage space onto Compact Flash card

An error message appears in case these conditions are not fulfilled.

At switching off the printer the state of the current print order is saved
to the corresponding directory of the Compact Flash Card.

However the following conditions have to be fulfilled:



Compact Flash card inserted in drive A



Compact Flash card not write protected



Enough free storage space onto Compact Flash card

In case the hotstart function is set to On, at a new start of printer the
saved layout data and the print order state is loaded from the
corresponding file on the Compact Flash card. Because of this reason
a Compact Flash card has to be inserted at switching on the printer. In
case it is impossible to load the data an error message appears.

Saving the
current layout

Saving the printer
order state

Loading a layout and
printer order state

«
...
84
85
86
87
88
...
»

Содержание DPM III XI

































































































Отзывы:

Нет отзывов