Carl Valentin DPM III XI, Руководство по эксплуатации, Страница: 55 / 96

DPM III xi series Function Menu
04.18 Operating manual 55
Press key to arrive at the next menu item.
Print examples:
Settings: Printout of all settings such as speed, and transfer ribbon
material.
Bar codes: Printout of all available bar code types.
Fonts: Printout of all available font types.
Press key to arrive at the next menu item.
Input/Output:
Indication of signal level which indicates the signal a print order is
started.
0 - Low
1
– High
Press key to arrive at the next menu item.
Online/Offline:
This function is activated e.g. if the transfer ribbon is to be changed. It
is avoided that a print order is processed although the module is not
ready. If the function is activated then press the key to change
between Online and Offline mode. The respective state is indicated in
the display.
Standard: Off
Online: Data can be received by interface. The keys of the foil
keyboard are only active, if you changed in the Offline mode with key
.
Offline: The keys of the foil keyboard are still active but received data
are not processed. If the module is again in Online mode then new
print orders can be again received.
Press key to arrive at the next menu item.
TRB = Transfer ribbon advance warning:
Before the end of transfer ribbon, a signal is send by the control
output.
Warning diameter:
Setting of transfer ribbon advance warning diameter.
In case you enter a value in mm then a signal appears via control
output when reaching this diameter (measured at transfer ribbon roll).
Ribbon advance warning mode:
Warning:
When reaching the transfer ribbon advance warning
diamter, the corresponding I/O output is set.
Reduced print speed: Speed on which the printing speed is to be
reduced.
Error: The printing system stops when reaching the transfer ribbon
advance warning diameter with the message 'too less ribbon'.
Reduced print speed:
Setting of the reduced print speed in mm/s. This can be set in the
limits of the normal print speed.