Carl Valentin DPM III XI, Руководство по эксплуатации

Страница: 42 / 96

Function Menu DPM III xi series
42 Operating manual 04.18
7.3 Machine Parameters
Press key to access the function menu.
Press key as long as you arrive at the 'Machine Parameters'
menu.
Press key to select the menu.
Mode:
Selection of operating mode.
Mode 1 = Single item processing:
A print order with a defined number of pieces is transferred. After the
generating process the target number and the actual number of
pieces is shown in the display. A cycle is started via signal input 1 or
with key . With each cycle the actual number of pieces is
increased by the number of printed layouts. In case the target number
of pieces is reached the print order is finished and the display shows
again the main menu.
Mode 2 = Continuous mode:
A print order is transferred. After the generating process the number
of printed layouts is shown in the display. A cycle is started via signal
input 1 or with key . With each cycle the number of printed
layouts is increased. The print order is active as long as it is
terminated by the user or in case of new data transmission.
Mode 3:
Actually not used.
Mode 4 = Continuous mode, return without 'layout print' signal:
This operating mode corresponds to mode 2. At the return of the print
unit to the zero point of machine, however, the signal output 4 'layout
print' is not active.
Mode 5:
Actually not used.
Mode 6 = Test mode:
This operating mode corresponds to mode 2. After the return of the
print unit to the zero point of the machine, however, internally a further
cycle is started (endurance test).
Mode 7 = Direct start:
A print order is transferred. After termination of generating process the
print order is executed without an external signal.
Mode 8 = Single item processing, return without 'layout print'
signal:
This operating mode corresponds to mode 4 but not continuous.