Carl Valentin DPM III XI, Руководство по эксплуатации

Страница: 45 / 96

DPM III xi series Function Menu
04.18 Operating manual 45
Press key to arrive at the next menu item.
Head delay:
With the 'head delay' parameter, the time between moving down and
start of movement of printing carriage can be set.
If fields are directly at the beginning of layout, the printhead is moved
down before the printing carriage starts to move. The necessary time
for moving down depends on the lift of printhead.
Default: 30 ms.
Press key to arrive at the next menu item.
Backfeed delay:
Setting of time between end of print cycle and beginning of return of
the printing carriage to the zero point.
Default: 50 ms.
7.4 Layout Settings
Press key to access the function menu.
Press key as long as you arrive at the 'Layout settings' menu.
Press key to select the menu.
Print length:
Indication of way which the print mechanics has to move. The print
length depends on the length of the print mechanics.
Press key to arrive at the next menu item.
Column printing:
Indication of width of one layout as well as how many layouts are
placed side by side (see chapter 12.1 Column Printing, on page 85).
Taste to arrive at the next menu item.
Material selection:
Selection of the used print media.
Press key to arrive at the next menu item.
Flip layout:
The axis of reflection is in the middle of the layout. If the layout width
was not transferred to the module, automatically the default layout
width i.e. the width of the printhead is used. Because of this reason
you have to note that the layout should have the same width as the
printhead as otherwise this could lead to problems in positioning.
Press key to arrive at the next menu item.
Rotate layout:
As default the layout is printed with 0° head forward. In case of an
activated function, the layout is rotated by 180° and it is printed in
reading direction.