39
KOHJ-H-13-EN1-2.0-19042022
3. Disconnect air tube system’s Sixtube connector by pressing the blue CPC button and pulling the
connector out.
The cells can be emptied for transport or storage by removing the air tubes from the
controller and allowing the cells to deflate by themselves. You can expedite the deflation
by carefully folding the cells inward.
S
torage and transport conditions for the mattress system
Temperature
-25
o
C...+50
o
C
>
+35
o
C...+70
o
C with vapour pressure 50 hPa
Air humidity
max. 90%
• Store in a clean, dry place.
• The cells and the cover can be rolled up for storage using, for example, the
transport bag (accessory).
• The cells and the cover can be hung on a bar with the bottom facing down, fold-
ed once with the bottom parts against each other or spread out flat.
• Do not store anything on top of the mattress system.
• Do not place sharp or heavy objects on or near the mattress system.
• Keep heat sources away from the mattress system.
To maintain the battery’s performance, keep the controller contin-
uously connected to the mains for 12 hours at least every three (3)
months.
