36
KOHJ-H-13-EN1-2.0-19042022
• Max. washing temperature 95 °C
• Hang to dry (or use 1-point tumble dry in a washing bag)
• Ensure that the cover is entirely dry before commissioning it
• Do not chlorine bleach
• Do not iron
• Do not dry wash
• Do not use conditioners
Ensure that the cover is entirely dry before commissioning it.
7.1.4 Foam plastic supports
Remove the integrated foam plastic support from the cover (Note! Neo
ICU
Giraffe only).
After washing and drying the cover, the support can be placed back in their compart-
ments. Close the zippers.
The foam plastic supports must not be washed.
7.2 Checking the operability of the mattress system
To maintain the operational reliability of the mattress system, you need to monitor its
condition throughout its lifetime as follows.
7.2.1 Controller
The condition of the controller must be checked as follows
• when commissioning the controller
• when moving the controller
• when cleaning
• whenever there is reason to believe the device has been damaged
The controller should be visually inspected for the condition of the power cord and the
air tube connections, and that the seals of the plastic parts and the body between the
operator panel/frame and the connection port/base are in place. In addition, any sur-
face damage to the operating panel and the body, the mounting of the hanger and the
readability of the technical type plate markings should be checked.
If you notice any damaged components, contact Carital
®
service.
7.2.2 Cover
The condition of the cover must be checked as follows
• when cleaning
• if you suspect that the cover is broken or the interior is contaminated
• when the patient changes or weekly in long-term care
Check the cover’s seams, zipper operation, condition of the surface of the cover and any
darkening or stains on the interior of the cover and the foam plastic supports.
If you notice any damage, contact Carital
®
service.
