Carestream CS 8100 3D, Руководство пользователя

Страница: 75 / 98

Panoramic and 3D Modality User guide for CS 8100 3D Family (SM842) Ed07 69
Launching the Triple Tray Acquisition
To launch the triple tray impression acquisition, follow these steps:
1. Select the triple tray impression acquisition mode.
2. Follow the on-screen animated instruction on how to correctly position the triple tray impression at
the center of the black foam.
3. Leave the X-ray room and close the door.
4. On the Acquisition interface, when is green, press and hold the exposure button of the X-ray
remote control until the end of acquisition.
The indicator in the acquisition interface turns yellow and a warning sound is emitted to
indicate that X-ray emission is in progress.
The acquired image appears in the
Preview Screen .
5. Once the triple tray impression has been scanned, the Acquisition interface closes. Wait for the
3D object reconstruction.
The completely reconstructed object will display in the image browser.
Important:
•
Make sure that the triple tray impression is dry.
•
The triple tray impression must be level when you position
it on the black foam. If it is not level, use a scalpel to cut
and level it.
Important: You must place the triple tray impression on the black
foam in the same orientation as when you take it out of the patient
mouth.
Important: If you have a problem that requires you to stop the
acquisition, release the exposure button of the remote control or
press the red emergency stop button.